Garmin Autopilot Check Valve Kit [010-11203-10] Electrical | Battery Isolators The fairing block is used

The fairing block is used to match the deadrise angle by orienting the transducer's sound beam straight down by mounting the transducer parallel to the water surface

while the optional interface unit IF-NMEASC is available for conventional NMEA0183

Relative Humidity: 93% or less at +40° C

Consistent Position Accuracy

Mustang Pilot 38 PFD

Garmin Autopilot Check Valve Kit [010-11203-10] Electrical | Battery Isolators The fairing block is usedAutopilot Check Valve Kit This check valve kit is used with the 1. 2L and 2. 0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow pressure leak down through the pump while disengaged. Boats with rudder trim tabs (outboard or rudder) that are properly adjusted do not need this check valve kit. Compatible Devices: Reactor 40 Hydraulic Autopilot with GHC 20 Autopilot Instrument Reactor